What Level Ii Modifier Indicates the Upper Left Eyelid

What Are Medical Coding Modifiers?

A medical coding modifier is two characters (letters or numbers) appended to a CPT^® or HCPCS Level II code. The modifier provides additional information about the medical procedure, service, or supply involved without changing the meaning of the code. Medical coders use modifiers to tell the story of a particular encounter.

For instance, a coder may use a modifier to indicate a service did not occur exactly as described by a CPT^® or HCPCS Level II code descriptor, but the circumstance did not change the code that applies. A modifier also may provide details not included in the code descriptor, such as the anatomic location of the procedure. Some payer programs may have modifiers that apply only when you're reporting codes in connection with those programs, as well.

The CPT^® code book Introduction provides these additional examples of when a modifier may be appropriate:

• The service or procedure has both professional and technical components.
• More than one provider performed the service or procedure.
• More than one location was involved.
• A service or procedure was increased or reduced in comparison to what the code typically requires.
• The procedure was bilateral.
• The service or procedure was provided to the patient more than once.

Proper use of modifiers is important both for accurate coding and because some modifiers affect reimbursement for the provider. Omitting modifiers or using the wrong modifiers may cause claim denials that lead to rework, payment delays, and potential reimbursement loss.

CPT^® Modifiers

The American Medical Association (AMA) holds copyright in CPT^®. CPT^® modifiers are generally two digits, although performance measure modifiers that apply only to CPT^® Category II codes are alphanumeric (1P-8P).

These are examples of some of the most commonly used CPT^® modifiers:

• 25 Significant, separately identifiable evaluation and management service by the same physician or other qualified health care professional on the same day of the procedure or other service
• 26 Professional component
• 59 Distinct procedural service

You'll find CPT^® modifiers listed in your CPT^® code book. A complete online CPT^® resource also should include CPT^® modifiers. Note that CPT^® code books often include an abbreviated list of HCPCS Level II modifiers.

HCPCS Level II Modifiers

HCPCS Level II codes and modifiers are maintained by the Centers for Medicare & Medicaid Services (CMS). HCPCS Level II modifiers are alphanumeric or have two letters.

Below are some examples of HCPCS Level II modifiers:

• E1 Upper left, eyelid
• TC Technical component; under certain circumstances, a charge may be made for the technical component alone; under those circumstances the technical component charge is identified by adding modifier 'tc' to the usual procedure number; technical component charges are institutional charges and not billed separately by physicians; however, portable x-ray suppliers only bill for technical component and should utilize modifier tc; the charge data from portable x-ray suppliers will then be used to build customary and prevailing profiles
• XS Separate structure, a service that is distinct because it was performed on a separate organ/structure

You can find HCPCS Level II modifier lists in HCPCS Level II code books and in online coding resources. Because the HCPCS Level II code set is not copyrighted, the modifiers are also publicly available on CMS' Alpha-Numeric HCPCS site and HCPCS Quarterly Update site.

Pricing Modifiers and Informational Modifiers

In addition to separating modifiers based on whether they're from the CPT^® or HCPCS Level II code set, modifiers are also categorize by type. Two important categories are pricing modifiers (also called payment-impacting modifiers or reimbursement modifiers) and informational modifiers.

Pricing Modifiers

A pricing modifier is a medical coding modifier that causes a pricing change for the code reported. The Multi-Carrier System (MCS) that Medicare uses for claims processing requires pricing modifiers to be in the first modifier position, before any informational modifiers. On the CMS 1500 claim form, the appropriate field is 24D (shown below). You enter the pricing modifier directly to the right of the procedure code on the claim. Most providers use the electronic equivalent of this form to bill Medicare for professional (pro-fee) services.

Claims that do not have the pricing modifier in the first position may encounter processing delays. To assist with proper reporting and modifier placement, individual payers may provide lists that distinguish pricing modifiers from informational modifiers for their claims. For instance, the WPS Government Health Administrators (WPS GHA) site includes a Pricing Modifier Fact Sheet that not only lists pricing modifiers, but also identifies which of those modifiers you should put in a secondary position if another pricing modifier is required for the code.

Informational Modifiers

An informational modifier is a medical coding modifier not classified as a payment modifier. Another name for informational modifiers is statistical modifiers. These modifiers belong after pricing modifiers on the claim.

Note that informational modifiers may affect whether a code gets reimbursed, so they may be relevant to payment, despite the name "informational." For instance, coders often use modifier 59 to override Medicare's National Correct Coding Initiative (NCCI) Procedure-to-Procedure (PTP) edits, bringing in payment for both codes in the code edit pair. Although you would not receive payment for the Column 2 code of the edit without modifier 59 on one of the codes from the edit pair, you may find modifier 59 classified as an informational modifier rather than a payment modifier. To return to our WPS GHA example, the payer lists modifier 59 as an informational modifier.

One payer's list of pricing and informational modifiers may not match another's list, so medical coders need to stay current on individual payer policy to avoid incorrect modifier placement that could affect claim processing.

NCCI Modifiers

An NCCI PTP-associated modifier is a modifier that Medicare and Medicaid accept to bypass an NCCI PTP edit under appropriate clinical circumstances. Bypassing or overriding an edit is also called unbundling.

Modifier 59, referenced in the previous section, is just one of the modifiers that can bypass an NCCI edit. Identical NCCI PTP-associated modifier lists are shown in the National Correct Coding Initiative Policy Manual for Medicare Services available on CMS' NCCI edits page and in the National Correct Coding Initiative Manual for Medicaid Services available on the Medicaid NCCI reference documents page.

Table 1 shows the complete listing of NCCI PTP-associated modifiers. The categories (Anatomic Modifiers, Global Surgery Modifiers, and Other Modifiers) are how Medicare and Medicaid divide these modifiers.

Table 1: NCCI PTP-Associated Modifiers

Modifier	Abbreviated Description
Anatomic Modifiers
E1-E4	Eyelids
FA, F1-F9	Fingers and thumbs
TA, T1-T9	Toes
LT, RT	Left side and right side of body
LC, LD, RC, LM, RI	Coronary arteries
Global Surgery Modifiers
24	Unrelated postoperative evaluation and management (E/M) service
25	Separate E/M on same day as other service
57	Decision for surgery
58	Staged/related postoperative procedure
78	Unplanned postoperative return to the operating room
79	Unrelated postoperative procedure
Other Modifiers
27	Multiple same-date outpatient hospital E/M services
59	Distinct procedural service
91	Repeat lab tests
XE, XP, XS, XU	Separate encounter, practitioner, structure, service

While each of these modifiers is important, a few deserve special attention because they're among the most used (or misused). Below is an overview of these modifiers.

NCCI Modifier 25: Separate E/M

When a patient has a separate E/M service along with a procedure or other service on the same day by the same provider, you may report that E/M code separately for reimbursement by appending modifier 25 Significant, separately identifiable evaluation and management service by the same physician or other qualified health care professional on the same day of the procedure or other service.

Based on the descriptor, an E/M encounter must meet the criteria below to qualify for separate reporting using modifier 25.

Significant, Separately Identifiable E/M Service

Many coders find that determining whether an E/M service is significant and separately identifiable is the most problematic requirement for modifier 25 use. The documentation must clearly show that the provider performed extra E/M work beyond the usual work required for the other procedure or service on the same date. In other words, if you removed all the documentation represented by the code for the other procedure or service, would the remaining documentation support reporting an E/M code?

Regarding diagnoses for these encounters, the Medicare and Medicaid NCCI manuals say the diagnosis can be the same for the procedure/service and separate E/M (both manuals include this in Chapter I.D). Although separate diagnoses are not required, experienced coders have found that linking one ICD-10-CM code to the procedure/service code and another ICD-10-CM code to the E/M code may speed claim processing. The separate ICD-10-CM codes make the distinct reasons for the E/M and other procedure or service more obvious. You should report different diagnosis codes, however, only if the documentation supports them.

Same Physician or Other Qualified Healthcare Professional

To interpret the "same physician" requirement correctly, medical coders must remember that Medicare follows this rule found in Medicare Claims Processing Manual, Chapter 12, Section 30.6.5:

Physicians in the same group practice who are in the same specialty must bill and be paid as though they were a single physician. If more than one evaluation and management (face-to-face) service is provided on the same day to the same patient by the same physician or more than one physician in the same specialty in the same group, only one evaluation and management service may be reported unless the evaluation and management services are for unrelated problems. Instead of billing separately, the physicians should select a level of service representative of the combined visits and submit the appropriate code for that level.

Same Day of the Procedure or Other Service

Determining whether an E/M service occurred on the same date of service as another procedure or service is typically straightforward. But keep in mind some points related to Medicare's global surgery rules.

You may append modifier 25 to an E/M code reported on the same date as a minor surgical procedure code, which is a code with global period indicator 000 or 010 on the Medicare Physician Fee Schedule (MPFS), according to Chapter I.E of the Medicare NCCI manual. The manual also states you may append modifier 25 to an E/M code performed on the same date as a code with a global indicator of XXX.

Before you report an E/M code on the same date as a procedure code with indicator 000 (0-day global), 010 (10-day global period), or XXX (global rules not applicable), consider that those codes include the pre-, intra-, and post-procedure work involved. You should not report an E/M code for that work, even with modifier 25 appended.

Medicare also includes the decision to perform a minor surgical procedure in the procedure code, the NCCI manual states. So, you shouldn't report a separate E/M code for that work. When you're reporting an E/M code representing the decision to perform a major surgery (one with a 090 global indicator, which represents a 90-day global period), you should append modifier 57 Decision for surgery, and not modifier 25.

Modifier 25 Example

Here is an example of when to use modifier 25 based on a scenario in Medicare Claims Processing Manual, Chapter 12, Section 40.1.C. Suppose the physician sees a patient with head trauma and decides the patient needs sutures. After checking allergy and immunization status, the physician performs the procedure. An E/M is not separately reportable in this scenario. But, if the physician performs a medically necessary full neurological exam for the head trauma patient, then reporting a separate E/M with modifier 25 appended may be appropriate.

NCCI Modifiers 59 and X{EPSU}: Distinct Service

Modifier 59 Distinct procedural service is a medical coding modifier that indicates documentation supports reporting non-E/M services or procedures together that you normally wouldn't report on the same date. Appending modifier 59 signifies the code represents a procedure or service independent from other codes reported and deserves separate payment.

Like modifier 25, modifier 59 is difficult to master because it requires determining whether the code is truly distinct and separately reportable from other codes. The CPT^® definition of modifier 59 advises that the modifier may be appropriate for a code when documentation shows at least one of the following:

• A separate patient encounter or session
• A different procedure or surgery
• A different anatomic site or organ system
• A separate incision/excision
• A separate lesion
• A separate injury (or area of injury in the case of an extensive injury)

The CPT^® definition also states that you should not use modifier 59 when a more descriptive modifier is available. For instance, you may be able to use anatomic modifiers to demonstrate that procedures occurred at separate sites on the body.

As an example, the first-quarter 2021 Medicare NCCI PTP edits include the edit pair 29827 Arthroscopy, shoulder, surgical; with rotator cuff repair and 29820 Arthroscopy, shoulder, surgical; synovectomy, partial. The edit has a modifier indicator of "1," which means you may bypass the edit in appropriate clinical circumstances. An article about modifier 59 in MLN Matters SE1418 states you shouldn't report 29820 (with or without an NCCI modifier) "if both procedures are performed on the same shoulder during the same operative session. If the procedures are performed on different shoulders, modifiers RT and LT should be used, not Modifiers 59 or -X{EPSU}."

X{EPSU} Modifiers

When considering whether to append modifier 59, medical coders must factor in the so-called X{EPSU} modifiers. These are HCPCS Level II modifiers that Medicare created as more specific alternatives to modifier 59:

• XE Separate encounter, a service that is distinct because it occurred during a separate encounter
• XP Separate practitioner, a service that is distinct because it was performed by a different practitioner
• XS Separate structure, a service that is distinct because it was performed on a separate organ/structure
• XU Unusual non-overlapping service, the use of a service that is distinct because it does not overlap usual components of the main service

In the announcement about the creation of the X{EPSU} modifiers in 2014, CMS stated, "Usage to identify a separate encounter is infrequent and usually correct; usage to define a separate anatomic site is less common and problematic; usage to define a distinct service is common and not infrequently overrides the edit in the exact circumstance for which CMS created the edit in the first place." The use of the more specific modifiers shows the reason the service was separate or distinct in a way that modifier 59 does not. This specificity gives auditors, payers, and providers more information to help them determine which type of reporting is prone to errors.

Medicare still accepts modifier 59, but check with individual payers to see which modifiers they prefer for a distinct procedural service.

NCCI Medicare Global Package Modifiers

Modifiers also play an important role in reporting procedures and services performed during a surgical code's global period, which is the timeframe when the global surgical package concept applies.

Medicare's global surgical package is a policy that incorporates payment in the surgery code fee for necessary, routine services before, during, and after a procedure. The policy applies to work performed by same-specialty members of the same group.

This article has already explained that global period indicators are relevant to modifier 25 and 57 use. Below are additional modifiers NCCI identifies as Global Surgery Modifiers, which means the modifiers may allow you to identify that a service is separately payable even though it occurred during a surgery's global period.

Modifier 24: Unrelated E/M

Modifier 24 Unrelated evaluation and management service by the same physician or other qualified health care professional during a postoperative period is appropriate for use only on E/M codes and only for services unrelated to the original procedure (the one with the global period).

Note that using modifier 24 to report an E/M related to the underlying disease process may be appropriate. Suppose, for example, that a biopsy reveals a malignant tumor. The patient returns during the biopsy's global period for suture removal and, on the same date, has a distinct E/M visit with the physician to discuss the diagnosis and treatment options. The work and time related to suture removal and routine post-biopsy care are not separately reportable, but you can report the E/M service using modifier 24.

Medicare's Global Surgery Booklet supports this use of modifier 24, stating, "Treatment for the underlying condition or an added course of treatment which is not part of normal recovery from surgery" is not included in Medicare's global surgical package. The CPT^® Surgery section guidelines provide similar wording: "Care of the condition for which the diagnostic procedure was performed or of other concomitant conditions is not included and may be listed separately."

Modifier 58: Staged/Related Procedure

Another important global package modifier is modifier 58 Staged or related procedure or service by the same physician or other qualified health care professional during the postoperative period.

Medicare's Global Surgery Booklet states that using modifier 58 signifies that performing a procedure or service during the postoperative period was one of the following (the CPT^® code book uses similar language):

• Planned prospectively or at the time of the original procedure
• More extensive than the original procedure
• For therapy following a diagnostic surgical procedure

You should append modifier 58 to the code for the staged or related procedure. A new postoperative period begins when you report that next procedure in the series.

Modifier 78: Unplanned Return to OR

When the patient returns to the operating or procedure room during the global period for an unplanned but related procedure, you should append modifier 78 Unplanned return to the operating/procedure room by the same physician or other qualified health care professional following initial procedure for a related procedure during the postoperative period.

A common use for modifier 78 is to report treatment for complications. The global surgical package does not include "treatment for postoperative complications which requires a return trip to the operating room (OR)," according to Medicare Claims Processing Manual, Chapter 12, Section 40.1.B.

The manual goes on to explain that an "OR for this purpose is defined as a place of service specifically equipped and staffed for the sole purpose of performing procedures. The term includes a cardiac catheterization suite, a laser suite, and an endoscopy suite. It does not include a patient's room, a minor treatment room, a recovery room, or an intensive care unit (unless the patient's condition was so critical there would be insufficient time for transportation to an OR)."

As Medicare Administrative Contractor (MAC) Palmetto GBA explains in its modifier 78 page, "If the subsequent surgery is related to the initial surgery but does not require a return to the operating room, and both are performed by the same surgeon, the subsequent surgery cannot be submitted separately. The global fee for the initial surgery includes additional related surgical procedures that do not require a return to the operating room."

The CPT^® Surgery section guidelines are not as specific as the Medicare global rules regarding the operating/procedure room requirements. The CPT^® guidelines state that "complications, exacerbations, recurrence, or the presence of other diseases or injuries requiring additional services should be separately reported." Because rules may differ, medical coders should check individual payer policies on reporting complications treated during the global period.

Modifier 79: Unrelated Procedure

For unrelated procedures during the postoperative period, the CPT^® code set provides modifier 79 Unrelated procedure or service by the same physician or other qualified health care professional during the postoperative period.

Reporting the same code for the initial procedure and the "unrelated" procedure may be appropriate, as this example of proper modifier 79 use shows: Suppose a patient has a right-eye cataract extraction reported using 66984 Extracapsular cataract removal with insertion of intraocular lens prosthesis (1 stage procedure), manual or mechanical technique (eg, irrigation and aspiration or phacoemulsification); without endoscopic cyclophotocoagulation. The same patient then has a left-eye cataract extraction (again, 66984) by the same physician during the global period for the first procedure. You should append modifier 79 to the code for the second procedure. Although both procedures require the same code, they are unrelated because each surgery was on a different eye.

Modifiers on the MPFS

The final group of modifiers covered here relate to the MPFS, which is funded by Medicare Part B. The MPFS lists fee maximums Medicare uses to pay physicians and other healthcare professionals on a fee-for-service basis. MPFS relative value files of course include relative value units (RVUs), but those files also provide information essential to proper use of the modifiers below for Medicare claims.

Modifiers 26 and TC: Professional and Technical Components

Medicare (along with many other payers) splits some codes into professional and technical components. For services like radiologic exams where the entity performing the test and the interpreting provider are often different, having separate professional and technical components simplifies reporting and payment. CPT^® code 71046 Radiologic examination, chest; 2 views is an example of a code that has both professional and technical components.

Using modifier 26 Professional component allows the provider to claim reimbursement for the provider's work, including supervision, interpretations, and reports. PC is an abbreviation for professional component, but medical coders must take care not to accidentally append modifier PC Wrong surgery or other invasive procedure on patient in place of modifier 26.

Modifier TC Technical component represents costs like paying technicians and paying for equipment, supplies, and the space used.

The PCTC IND (PC/TC Indicator) column in the MPFS relative value files reveals whether a code has a PC/TC split and whether you may append modifiers 26 and TC to the code. With 10 distinct indicators, medical coders benefit from referring to a current list of MPFS modifier indicator definitions to ensure they're using the modifiers correctly.

If a code has both a technical and a professional component and you report the code without using modifier 26 or TC, you're claiming that you've earned reimbursement for both components. This type of code with a PC/TC split is called a global code (not to be confused with the global period and global surgical package). For codes that accept modifiers 26 and TC, the MPFS RVU spreadsheet provides RVUs and indicators specific to the global code and the individual components. The global service rate equals the sum of the rates for the two components.

Modifier 53: Discontinued Procedure

In addition to modifiers 26 and TC, the Medicare relative value files includes modifier 53 Discontinued procedure. Four colonoscopy codes (44388, 45378, G0105, and G0121) have one row for the code and one row for the code with modifier 53. The reason is that Medicare wants contractors to pay a consistent amount for those colonoscopy codes with modifier 53 appended.

CPT^® guidelines state that appending modifier 53 is appropriate when a patient is scheduled and prepared for a total colonoscopy, but "the physician is unable to advance the colonoscope to the cecum or colon-small intestine anastomosis due to unforeseen circumstances."

Modifier 50: Bilateral Procedure

The MPFS includes a BILAT SURG (Bilateral Surgery) column that identifies how payment will differ if you report the code bilaterally. "Bilateral surgeries are procedures performed on both sides of the body during the same operative session or on the same day," states Medicare Claims Processing Manual, Chapter 12, Section 40.7.

To indicate a procedure was bilateral, it may be appropriate to append modifier 50 Bilateral procedure. But as the definition of bilateral indicator "1" shows, MACs check for multiple ways of reporting bilateral procedures, including modifier 50, modifiers RT Right side and LT Left side, or 2 units:

1: 150% payment adjustment for bilateral procedures applies. If the code is billed with the bilateral modifier or is reported twice on the same day by any other means (e.g., with RT and LT modifiers, or with a 2 in the units field), base the payment for these codes when reported as bilateral procedures on the lower of: (a) the total actual charge for both sides or (b) 150% of the fee schedule amount for a single code. If the code is reported as a bilateral procedure and is reported with other procedure codes on the same day, apply the bilateral adjustment before applying any multiple procedure rules.

Modifier 51: Multiple Procedures

The MULT PROC (Multiple Procedure) column in the Medicare relative value files is connected to modifier 51 Multiple procedures. However, your MAC and many other payers may instruct you not to append modifier 51 to codes. The payer will apply the multiple-procedure fee reduction rules based on the codes reported and which of the nine possible MULT PROC indicators the fee schedule assigns to the code.

Consequently, for those payers that do not accept modifier 51, the MULT PROC column offers information about expected payment rather than about whether to use modifier 51. As an example of how this column affects payment, this is Medicare's definition for multiple-procedure indicator "2":

2: Standard payment adjustment rules for multiple procedures apply. If procedure is reported on the same day as another procedure with an indicator of 1, 2, or 3, rank the procedures by fee schedule amount and apply the appropriate reduction to this code (100%, 50%, 50%, 50%, 50% and by report). Base the payment on the lower of (a) the actual charge, or (b) the fee schedule amount reduced by the appropriate percentage.

Pre-Op, Intra-Op, and Post-Op Modifiers

The MPFS splits the work required for a surgery into the PRE OP (Preoperative Percentage), INTRA OP (Intraoperative Percentage), and POST OP (Postoperative Percentage) columns, which show how much of the fee each portion of the surgical work earns in cases where the same provider is not responsible for every aspect of care.

To alert the payer that different providers are involved, CPT^® provides these modifiers:

• 54 Surgical care only
• 55 Postoperative management only
• 56 Preoperative management only

Review payer rules for proper use of these modifiers. For instance, the Medicare Global Surgery Booklet clarifies that modifier 55 is appropriate only when there has been a transfer of care. You'll use the surgery date as the date of service and can only use the modifier if the code has a global period of 10 days or 90 days.

Modifiers for Multiple Surgeons

The MPFS relative value files also include columns to indicate Medicare's code-specific policies on modifier use and payment when multiple providers perform a procedure at the same session.

The CO-SURG (Co-surgeons) column is related to modifier 62 Two surgeons. Medicare's Global Surgery Booklet provides these examples:

• A procedure requires two physicians of different specialties to perform it. Each reports the code with modifier 62 appended
• Two surgeons simultaneously perform parts of a procedure, such as for a heart transplant or bilateral knee replacements. Again, each surgeon reports the code with modifier 62 appended.

The TEAM SURG (Team Surgery) column is connected to modifier 66 Surgical team. This modifier is appropriate when more than two surgeons of different specialties perform a procedure. Each surgeon bills the code with modifier 66 appended.

The ASST SURG (Assistant at Surgery) column provides information related to these modifiers:

• 80 Assistant surgeon
• 81 Minimum assistant surgeon
• 82 Assistant surgeon (when qualified resident surgeon not available)
• AS Physician assistant, nurse practitioner, or clinical nurse specialist services for assistant at surgery

The ASST SURG indicator will let you know whether payment for the additional provider is permitted, not permitted, or possibly permitted if documentation supports medical necessity.

With modifier 62, the Medicare fee for each co-surgeon is 62.5% of the global surgery fee schedule amount. For team surgeons using modifier 66, the Global Surgery Booklet advises that claims must have enough information to allow the MAC to determine pricing "by report." For assistant-at-surgery services by physicians, the Medicare rate is 16% of the surgical payment. These examples prove yet again that proper use of medical coding modifiers is essential both for coding precision and for accurate payment.

CPT^® and HCPCS Level II Modifier FAQs

Can you use modifiers on CPT^® add-on codes?

Modifiers may be appropriate on CPT^® add-on codes (identified here and in many coding resources with a +), but you should confirm that the individual modifier is appropriate for the code you're reporting.

Examples of when it is appropriate to append a modifier to an add-on code include:

• The CPT^® code set includes add-on code +74248 Radiologic small intestine follow-through study, including multiple serial images (List separately in addition to code for primary procedure for upper GI radiologic examination). The MPFS shows that it is appropriate to append modifier 26 Professional component or TC Technical component to this code when you are reporting only one of those components for this service.
• Medicare includes some add-on codes in NCCI PTP edit pairs. For instance, +22845 Anterior instrumentation; 2 to 3 vertebral segments (List separately in addition to code for primary procedure) is a column 2 code for +22853 Insertion of interbody biomechanical device(s) (eg, synthetic cage, mesh) with integral anterior instrumentation for device anchoring (eg, screws, flanges), when performed, to intervertebral disc space in conjunction with interbody arthrodesis, each interspace (List separately in addition to code for primary procedure) in the first-quarter 2021 edits. The edit has a modifier indicator of "1," which means you may bypass the edit by using one or more NCCI PTP-associated modifiers. Note that in many cases add-on codes are not included in NCCI PTP edits because if an edit prevents payment of the primary code, the payer also will not reimburse the add-on code for that primary code. This domino effect makes an edit for the add-on code unnecessary.

An example of when it's not appropriate to append a specific modifier to an add-on code include:

• CPT^® guidelines state that you should not use modifier 50 Bilateral procedure on add-on codes: "When the add-on procedure can be reported bilaterally and is performed bilaterally, the appropriate add-on code is reported twice, unless the code descriptor, guidelines, or parenthetical instructions for that particular add-on code instructs otherwise. Do not report modifier 50, Bilateral procedures, in conjunction with add-on codes."

Can you use CPT^® modifiers on HCPCS Level II codes and vice versa?

There is no general restriction on using the modifiers from one code set (CPT^® or HCPCS Level II) with the codes from another code set, and such use is common. Individual modifiers may be appropriate only with certain codes, so be sure to check the rules specific to the case you're reporting.

As an example, modifier QW CLIA waived test is a HCPCS Level II modifier that alerts the payer that the test being reported has waived status under the Clinical Laboratory Improvement Amendments (CLIA). The list of CLIA-waived tests on the CMS site provides a long list of CPT^® lab codes that are appropriate to report with modifier QW. A handful of HCPCS Level II codes are included in the list, as well.

Can you append more than one modifier to a CPT^® or HCPCS Level II code?

Appending both CPT^® and HCPCS Level II modifiers to a single code may be appropriate. For instance, an encounter may call for both CPT^® modifier 22 Increased procedural services and HCPCS Level II modifier LT Left side (used to identify procedures performed on the left side of the body) on one procedure code.

Claim forms provide space for multiple modifiers. Depending on payer rules, the number of modifiers required, and the space available, it may be appropriate to append modifier 99 Multiple modifiers to the code and then place additional modifiers in another section of the claim, such as CMS 1500 box 19.

What is the difference between modifier 52 and modifier 53?

Pro-fee coders may consider appending modifier 52 Reduced services or modifier 53 Discontinued procedure to a medical code when a provider does not complete the full procedure or service described by that code.

Appendix A of the AMA CPT^® code book explains that appending modifier 52 to a code is appropriate when provider discretion is the reason for partially reducing or eliminating a service or procedure.

You should append modifier 53 when the provider terminates a surgical or diagnostic procedure "due to extenuating circumstances or those that threaten the well being of the patient," Appendix A states. You should not use modifier 53 for elective cancellation of a procedure before anesthesia induction or surgical preparation in the operating suite.

Outpatient hospitals and ambulatory surgery centers (ASCs) should use modifier 73 Discontinued out-patient hospital/ambulatory surgery center (ASC) procedure prior to the administration of anesthesia and modifier 74 Discontinued out-patient hospital/ambulatory surgery center (ASC) procedure after administration of anesthesia for reporting.

Modifiers 73 and 74 apply only when the procedure is discontinued due to extenuating circumstances or issues that threaten the wellbeing of the patient.

When should you use repeat modifiers 76 and 77?

Modifier 76 Repeat procedure or service by same physician or other qualified health care professional is appropriate to use when the same provider repeats the procedure or service subsequent to the original procedure or service. Keep in mind that payers, including Medicare, may require same-specialty physicians in the same group to bill as if they are a single physician.

Modifier 77 Repeat procedure by another physician or other qualified health care professional is appropriate to use when a different provider repeats a procedure or service subsequent to the original procedure or service.

You should not use either modifier 76 or 77 on an E/M code, according to Appendix A of the AMA CPT^® code book.

Individual payers may provide additional guidance. For instance, WPS Government Health Administrators has a Modifier 76 Fact Sheet that clarifies you should use the modifier for repeat procedures performed on the same day.

What are the ABN modifiers (GA, GX, GY, GZ)?

An Advance Beneficiary Notice of Noncoverage (ABN) form helps a beneficiary decide whether to get an item or service that Medicare may not cover. The ABN lets the beneficiary know they may be financially liable if Medicare denies payment.

ABN claim reporting modifiers are listed in the MLN booklet Medicare Advance Written Notices of Noncoverage with the following explanations:

Modifier GA Waiver of liability statement issued as required by payer policy, individual case

• Append modifier GA when you issue a mandatory ABN for a service as required, and the ABN is on file. You do not need to submit a copy of the ABN to Medicare, but you must have it available on request. Use modifier GA when both covered and noncovered services appear on an ABN-related claim.

Modifier GX   Notice of liability issued, voluntary under payer policy

• Append modifier GX when you issue a voluntary ABN for a service Medicare never covers because the service is statutorily excluded or is not a Medicare benefit. You may use this modifier combined with modifier GY.

Modifier GY   Item or service statutorily excluded, does not meet the definition of any Medicare benefit or, for non-Medicare insurers, is not a contract benefit

• Append modifier GY when Medicare statutorily excludes the item or service, or the item or service does not meet the definition of any Medicare benefit. You may use this modifier combined with modifier GX.

Modifier GZ    Item or service expected to be denied as not reasonable and necessary

• Append modifier GZ when you expect Medicare to deny payment of the item or service because it is medically unnecessary, and you issued no ABN.

Is drug-waste modifier JW only for Medicare?

Modifier JW Drug amount discarded/not administered to any patient is not limited to use for Medicare claims. Other third-party payers also may accept this HCPCS Level II modifier.

Check payer policy to confirm, but non-Medicare payers may follow Medicare rules. For instance, Medicare states you should use modifier JW only with drugs designated as single use or single dose on the FDA-approved label or package insert.

Medicare requires reporting the amount used on one line and the amount discarded on a second line. Medicare Claims Processing Manual, Chapter 17, Section 40, provides the example of a single-use vial labeled to contain 100 units that has 95 units administered and 5 units discarded. In that case, you should report the 95-unit dose on one line. Then report the discarded 5 units on another line with modifier JW appended to the supply code.

When should you use modifier KX?

Modifier KX Requirements specified in the medical policy have been met is appropriate in a variety of circumstances. In particular, Medicare and some other payers may accept KX for these types of claims:

• Outpatient physical therapy, occupational therapy, or speech language pathology
• Durable medical equipment, prosthetics, orthotics, and supplies (DMEPOS)
• Gender-specific services for patients who are transgender, are intersex, or have ambiguous genitalia

For instance, on physical therapy claims reported to Medicare, modifier KX may show that services are medically necessary and reasonable after the beneficiary has exceeded the defined threshold.

For DMEPOS claims, modifier KX indicates the supplier ensured coverage criteria was met and that there is documentation to support medical necessity.

Modifier KX is also appropriate on Part B professional claims to identify gender-specific services performed on transgender or intersex patients or those with ambiguous genitalia. The modifier alerts the payer to process the claim as usual despite any gender-specific edits that may apply.

When should you use hospice modifiers GV and GW?

The hospice modifiers are modifier GV and GW:

GV     Attending physician not employed or paid under arrangement by the patient's hospice provider

GW    Service not related to the hospice patient's terminal condition

Before appending modifier GV to a code, you should check these points:

• The patient is enrolled in a hospice.
• The provider is not employed by the hospice.
• The provider (physician or nonphysician practitioner) was identified as the patient's attending physician when the patient enrolled in hospice.

Medicare Claims Processing Manual, Chapter 11, Section 40.1.3, provides more information about attending physicians for hospice patients. For instance, the manual states, "When hospice coverage is elected, the beneficiary waives all rights to Medicare Part B payments for professional services that are related to the treatment and management of his/her terminal illness during any period his/her hospice benefit election is in force, except for professional services of an independent attending physician, who is not an employee of the designated hospice nor receives compensation from the hospice for those services."

You should use modifier GW when a provider renders a service to a patient enrolled in a hospice, and the service is not related to the patient's terminal condition.

Does Medicare provide information about preventive services modifier 33?

Modifier 33 Preventive services is referenced in Medicare Claims Processing Manual, Chapter 18.

Section 1.2 and Section 60.1.1 both state, "Coinsurance and deductible are waived for moderate sedation services (reported with G0500 or 99153) when furnished in conjunction with and in support of a screening colonoscopy service and when reported with modifier 33. When a screening colonoscopy becomes a diagnostic colonoscopy, moderate sedation services (G0500 or 99153) are reported with only the PT modifier [Colorectal cancer screening test; converted to diagnostic test or other procedure]; only the deductible is waived."

Section 140.8 about advance care planning (ACP) as an element of an annual wellness visit (AWV) also references modifier 33: "The deductible and coinsurance for ACP will only be waived when billed with modifier 33 on the same day and on the same claim as an AWV (code G0438 or G0439), and must also be furnished by the same provider. Waiver of the deductible and coinsurance for ACP is limited to once per year. Payment for an AWV is limited to once per year. If the AWV billed with ACP is denied for exceeding the once per year limit, the deductible and coinsurance will be applied to the ACP."

What is the difference between telemedicine modifiers 95 and GT?

Elements such as payer policy and setting will determine whether you use modifier 95 Synchronous telemedicine service rendered via a real-time interactive audio and video telecommunications system or modifier GT Via interactive audio and video telecommunication systems.

For Medicare, professional claims use place of service (POS) 02 Telehealth to indicate the service was a telehealth service from a distant site (but see Note below). Modifier GT is used on institutional claims for distant site services billed under Critical Access Hospital (CAH) method II.

Other payers may require you to use modifier 95 to indicate the performance of a telehealth service.

Note: Medicare and many other payers implemented temporary rules related to reporting telehealth codes, modifiers, and POS during the Public Health Emergency (PHE) related to COVID-19, so be sure to follow the guidance that applies to your service.

Last Reviewed on Jan 25, 2021 by AAPC Thought Leadership Team

What Level Ii Modifier Indicates the Upper Left Eyelid

Source: https://www.aapc.com/modifiers/

Share this post